|
The following table
represents an average of results obtained from a large number of tests and
is offered only as a guide in accordance with standard procedure, the
specimens used were 1” diameter. Under no condition do we guarantee these
statistics to be accurate.
The section size,
finishing temperature and cooling rate during the rolling process influence
the final mechanical properties of any steel in the As-Rolled condition.
The amount of size reduction in cold drawing will affect the mechanical
properties of Cold Drawn Bars. Turned and Polished as well as Turned,
Ground & Polished Bars have approximately the same mechanical properties as
the Hot Rolled Bars from which they were produced.
|
